Charnwood W616 Operations Instructions download pdf (Page 5)

Unpacking

Open the carton and carefully unpack all of the

contents.

Familiarise yourself with the parts and take the

time to sort out the various types of nuts and bolts.

Assembly

Important note: These instructions relate to building a saw which is to be

permanently mounted on its stand. If you have a small workshop, or will need to

transport the saw, DO NOT bolt the rails to the body of the saw as shown in first two

illustrations.

Instead, fully assemble the floorstand first. The main body of the machine is

designed to simply fit on top of the floorstand and is located by the rubber feet.

Whenever possible it is recommended that the saw is bolted to the stand for

increased stability.

Leave all bolts finger tight until assembly of the

legs is completed.

Invert the machine and bolt one of the rails

marked ‘B’ to the front underside as shown and

the second one to the rear. Use the hex headed

bolts and washers provided.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Charnwood W616 Operations Instructions Page 5