Charnwood C4 Operations Instructions download pdf (Page 15)

INSTALLATION INSTRUCTIONS

4. SECURE THE CASING TO THE HEARTH

Secure the stove by inserting screws through the holes in the base (see

diagram).

5. FILL WITH INSULATION

If for any reason it is not going to be possible to sweep the chimney

through the appliance, a soot door must be fitted.

MAKE GOOD THE OPENINGS AND

Make good the opening at the top and sides of the convection casing

ensuring that a good seal is made with the side flanges. It is

recommended to use heat resistant plaster on the wall surrounding the

stove.

Follow the liner manufacture’s recommendations regarding insulating

the liner.

6. SLIDE IN STOVE

Carefully slide the stove into the convection casing until the

flue outlet lines up with the flue collar and the air inlet

engages at the rear of the stove.

7. INSERT COACH BOLTS

From the inside of the stove, insert coach bolts into

slots A and B so that they hang down into the stove.

These are held in place by the clips and will secure the

flue collar.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Charnwood C4 Operations Instructions Page 15